Our Products
GLINK
Dataline Communications Link
Description: Dataline Interface
Catalog #: GLINK
Operating Environment: 0-55 Degrees C (32131 F)095% RH, Non Condensing, Non Corrosive atmosphere.
Weight: 0.3 Kg / 0.5 lb.
Alarm Contacts: 2 Amp, 28 VAC
Power Requirements: 120 VAC outlet / 12 VDC Transformer (supplied) 120 VAC outlet / 24 VC Transformer (supplied)
FEATURES AND BENEFITS
Softwiring
The GLINK allows access to the dataline for global programming, monitoring and control. The GLINK also provides a central time clocking function which automatically synchronizes/sets the clocks in all of the Lighting Automation Panels.
Universal inputs
The GLINK is a desk mounted device with system monitoring capabilities and visual indication of:
- Power to the Unit
- On Line Status
- Dataline Power
- Field Failure
Overlapping groups
The GLINK incorporates a builtin Ethernet Network card which is discoverable with supplied software. No need for comports!
Isolated group pilot
No need for an additional Dataline Power Supply unit as the GLINK now has a built in Dataline Power Supply.
GCC48
Lighting Automation Panel Controller Card
Description: Lighting Automation Panel Controller Card
Catalog #: GCC48
Operating Environment: 0-55 Degrees C (32-131°F)0-95% RH
Weight: 0.5 Kg /1lb
Codes: UL 916 Energy Management CSA Certified
FEATURES AND BENEFITS
Multiple switch control
The GCC48 is a plug-in controller card which is used in conjunction with 1-4 Relay Driver Cards. It provides the control logic and memory for operating a single Lighting Automation Panel with up to 48 relays and fourteen programmable switches. It also supports communications over its RS-232 port and the data line.
Relay grouping for common control
Address switches are rotary style with visual identification of the number set. Address can run from 000 to 999.
GRDC12
12 Relay Drive/Monitor Card
Description: 12 Relay Drive/Monitor Card
Catalog#: GRDC12
Operating Environment: 0-55 Degrees C (32-131°F)0-95% RH
Mounting: In RINTER00xx
Weight: 0.5 Kg / 1lb.
Codes: UL 916 Energy Management CSA Certified
FEATURES AND BENEFITS
12 Relay Drive
The GRDC12 is used in conjunction with the RLM48 learn mode cards. The GRDC12 actuates a bank of 12 relays ON and OFF and monitors their states. It also monitors 3 programmable system switch inputs. Each card is associated with a bank of 12 relays. The 24 relay panel accepts two cards (1-12,13-24), the 48 relay panel accepts four cards(1-12, 13-24, 25-36, 37-48).
GREPEAT
Dataline Repeater
Description: Dataline Repeater
Catalog #: GREPEAT
Operating Environment: 0-55 Degrees C (32-131°F) 0-95% RH
Power Requirements: 24 VDC
Dimensions: 5.002” x 3.570” x 1.502” 127.05mm x 90.68mm x 38.15mm
Weight: 51g / 0.035 oz
FEATURES AND BENEFITS
Dataline Repeater
The GREPEAT is a dataline signal booster. It permits the total length of dataline to be extended beyond the normal 1219m (4,000’) limit. Use of a dataline repeater allows lighting control panels and dataline switches in largebuildings, multi-office complexes, or distantly located sites to be networked together.
Description
Each GREPEAT will extend the maximum dataline length by 1219m (4,000’). Other than the limit of 500 devices in any combination perdataline, there is no limit to the number ofdataline repeaters that can be used together.The device supports longer data lines whilereducing noise and providing protection against electrical transients.
GMSIM
Motion Sensor Interface Module
Description: Motion Sensor Interface Module
Catalog#: GMISM
Operating Environment: 0-55 Degrees C (32-131°F)0-95% RH, Non Condensing Non Corrosive atmosphere
Power Requirements: 24 VDC
Dimensions: 5.002” x 3.570” x 1.502” 127.05mm x 90.68mm x 38.15mm
Weight: 51g / 0.035 oz
FEATURES AND BENEFITS
Motion Sensor Interface Module
The GMISM is able to be used with almost any motion sensor that is on the market today, to control the GE relay. The GMSIM has the ability to use the Blue Control wire or Auxillary Relay from any motion sensor to control a momentary input to the GE relay or circuit board. The GMSIM also has connections for a momentary switch and Dry Contact for a BAS system.
GPCON
The GPCON is an outdoor photodiode light level sensor for a Genesis daylighting controller.
Description: Genesis daylighting controller
Catalog#: Hooded aperture for shielding from direct sunlight.
Operating Environment: Stable operation from -2° to 150° F
Power Requirements: 24 VDC
Dimensions: Class 2,24VAClow-voltage wiring.
Weight: 51g / 0.035 oz
FEATURES AND BENEFITS
GPCON Photocell Controller
APPLICATION
OPERATION
GS Switches
GS2-32
Description: GLCS Series Switches
Catalog #: GS2-32 (Unlighted)
Colour: Ivory Button with Black Trim
Operating Environment: 0-55 Degrees C (32-131°F)0-95% RH, Non-Condensing Non-Corrosive atmosphere
FEATURES AND BENEFITS
GS2-32
These switches are designed for installation in mounting straps with covers or for snap in panel mounting [19mm (0.75)x33mm (1.3”)}. The line includes 2-button switches with normally open 3 AMP 28 VAC contacts providing a single-pole double-throw configuration. Each switch is provided with wire terminals 110mm (4.25”) 18AWG.
GS Switches
GS2-32P
Description: GLCS Series Switches
Catalog #: GS2-32P (Pilot Light)
Colour: White Button with Black Trim
Operating Environment: 0-55 Degrees C (32-131°F)0-95% RH, Non-Condensing Non-Corrosive atmosphere
FEATURES AND BENEFITS
GS2-32P
These switches are designed for installation in mounting straps with covers or for snap in panel mounting [19mm (0.75)x33mm (1.3”)]. The line includes 2-button switches with normally open 3 AMP 28 VAC contacts providing a single-pole double-throw configuration. The GS2-32P is a switch with a Pilot light with 0.04 AMP 28 VAC pilot lamp in “ON” button. Each switch is provided with wire terminals 110mm (4.25”) 18AWG.
GS GLCS Series Switches
GS2-37
Description: GLCS Series Switches
Catalog #: GS2-37 (Unlighted)
Colour: White Button with Black Trim
Operating Environment: 0-55 Degrees C (32-131°F)0-95% RH, Non-Condensing Non-Corrosive atmosphere
FEATURES AND BENEFITS
GS2-37
These switches are designed for installation in mounting straps with covers or for snap in panel mounting [19mm (0.75)x33mm (1.3”)}. The line includes 2-button switches with normally open 3 AMP 28 VAC contacts providing a single-pole double-throw configuration. Each switch is provided with wire terminals 110mm(4.25”) 18AWG.
GS GLCS Series Switches
GS2-37P
Description: GLCS Series Switches
Catalog #: GS2-37P (Pilot Light)
Colour: White Button with Black Trim
Operating Environment: 0-55 Degrees C (32-131°F)0 95% RH, Non-Condensing Non-Corrosive atmosphere
FEATURES AND BENEFITS
GS2-37P
These switches are designed for installation in mounting straps with covers or for snap in panel mounting [19mm (0.75)x33mm (1.3”)]. The line includes 2-button switches with normally open 3 AMP 28 VAC contacts providing a single-pole double-throw configuration. The GS2-32P is a switch with a Pilot light with 0.04 AMP 28 VAC pilot lamp in “ON” button. Each switch is provided with wire terminals 110mm (4.25”) 18AWG.